Ease Release™ 2831

ER2831pint ⓘ D3D1F80E-19ED-AC45-A0C4-9E5068E38F56
Auxiliary products
flame.svg exclamation.svg health-hazard.svg environment.svg

Danger

H304 - Kann bei Verschlucken und Eindringen in die Atemwege tödlich sein.
H315 - Verursacht Hautreizungen.
H336 - Kann Schläfrigkeit und Benommenheit verursachen.
€ 27,33

(€ 22,97 ohne 19% MwSt.)

Auf Lager

Beschreibung

Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Skin contact may cause dryness.Store and use material at room temperature 23°C. This product has a limited shelf life and should be used as soon as possible.SHAKE WELL BEFORE USINGApplying - Apply a coat of Ease Release™ 2831 with a spray or brush, and allow to dry. Rub Ease Release™ 2831 into mold surface with a clean cloth. Repeat two or three times to seal the mold surface. Start molding and reapply a light coat of Ease Release™ 2831 after each molding cycle.Finishing - Thorough cleaning of the molded parts is recommended prior to bonding or any other post mold finishing.

Anleitung

Spezifikationen

Storage Temperature 23°C
Solids 6 - 7 %
Appearance Hazy liquid
Viscosity Medium
Coverage Rate On Porous Surface 375 sq. ft. per gallon
Coverage Rate On Non-Porous Surface 750 sq. ft. per gallon
Verfügbar in Auxiliary products
Product Storage Temperature Flash Point Specific Gravity Shelf Life Solubility Percent Solids Dry Time First Coat Dry Time Second Coat Maximum Storage Temperature Dry Time Between Coats Final Coat Dry Time Chemical Composition Mix Ratio By Weight Color Weight Container Size Propellant Solvent Content Packaging Maximum Fill Volume Working Pressure Range Maximum Pressure Required Pressure To Spray Full Volume Solids Appearance Viscosity Coverage Rate On Porous Surface Coverage Rate On Non-Porous Surface Dimensions Primary Color
Royal JeL-E - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Foam Latex Release - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
HX-Barrier Coat™ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
HX Castor Oil™ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Sonite® Wax 23°C >100°F 0.84 g/cc Limited Unlimited in solvents such as kerosene or mineral spirits 30% - - - - - - - - - - - - - - - - - - - - - - - -
schellaklbruin - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
One Step™ 23°C 64°C - - - - 15 min. 30 min. - - - - - - - - - - - - - - - - - - - - - -
U-10 Mold Solution - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
SuperSeal™ 23°C - - Limited - - - - 48°C 5 min. 1 h. Contains Naphtha, Petroleum Distillates, Isopropanol - - - - - - - - - - - - - - - - - -
Stoner - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ACMOS 82-2405 - - - - - - - - - - - - 400 g Transparent 400 g 400 ml Propane/Butane Solvent-free 12 fl per box - - - - - - - - - - -
Vaseline - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Kwikee™ Sprayer - - - - - - - - - - - - - - - - - - - 709 ml 80-120 psi 200 psi 80 psi - - - - - - -
Ease Release™ 2831 23°C - - - - - - - - - - - - - - - - - - - - - - 6 - 7 % Hazy liquid Medium 375 sq. ft. per gallon 750 sq. ft. per gallon - -
Plaster Seperator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Jesmonite Release Wax - - - - - - - - - - - - - - - 20 ml - - - - - - - - - - - - 4 x 4 x 3.5 cm Gold
Anti-Tack (Paraffin Solution) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Warum bei FormX kaufen?

Abonnieren Sie unseren Newsletter

Erhalten Sie 5,- € Rabatt auf Ihren ersten Einkauf!

Visa logo iDeal logo Mastercard logo Paypal logo FedEx logo FedEx logo
Diese Website wurde entwickelt von Usecue B.V.
© 2026 FormX B.V.