In & Out™ II

Beschreibung

IN & OUT® II water soluble release agent will aid in releasing concrete or gypsum plaster castings from Smooth-On rubber molds. IN & OUT® II provides a clean, positive release and does not interfere with or affect surface detail and helps minimize air bubbles in finished castings. Simplify Your Production Casting With IN & OUT II® - Will Not Stain / Soften Concrete Or Gypsum Surfaces- Mix With Water - Economical- Will Not Affect Color Pigmenting Of Cast Concrete- Minimizes “Bug Holes” In Concrete And Air Bubbles In Gypsum Castings- Keeps Molds Clean - Does Not Build Up- Significantly Extends Mold LifeIN & OUT® II IS DILUTED WITH WATER. Mix 4 parts water to 1 part In & Out® II. Mixing can be done by hand or slow speed mixer. Do not shake or agitate as this may cause product to foam. How you dilute IN & OUT® II (amount mixed with water, coverage and frequency of application) will depend on the concrete aggregate mix and the form material you are casting into. For example, when casting concrete with a low grit/high sand content (minimal abrasion) into a polyurethane mold, the mix ratio of water to IN & OUT II® can be 4 : 1. High grit content may call for a dilution ratio of 2 parts water to 1 part release agent. Mix only amount needed for one day. Mixture may separate after 24 hours. Re-mix to a uniform consistency and apply.

Anleitung

Spezifikationen

Storage Temperature	23°C
Mix Ratio	4:1 (water to In & Out II)
Minimum Operating Temperature	10°C
Pressure For Spray Application	172 kPa

Product	Storage Temperature	Mix Ratio	Minimum Operating Temperature	Pressure For Spray Application	Coverage	Operating Temperature Range	Film Thickness	1 Gallon Weight	5 Gallon Weight	55 Gallon Weight	Tote Weight
In & Out™ II	23°C	4:1 (water to In & Out II)	10°C	172 kPa	-	-	-	-	-	-	-
AquaCon™	-	-	-	-	3200 square feet / 297 square meters per gallon	8°C to 23°C	0.0005 in / 0.013 mm	8.3 lbs / 3.76 kgs	41.6 lbs / 18.87 kgs	458 lbs / 207.75 kgs	2290 lbs / 1038.72 kgs

Product

Storage Temperature

Mix Ratio

Minimum Operating Temperature

Pressure For Spray Application

Coverage

Operating Temperature Range

Film Thickness

1 Gallon Weight

5 Gallon Weight

55 Gallon Weight

Tote Weight

In & Out™ II

23°C

4:1 (water to In & Out II)

10°C

172 kPa

AquaCon™

3200 square feet / 297 square meters per gallon

8°C to 23°C

0.0005 in / 0.013 mm

8.3 lbs / 3.76 kgs

41.6 lbs / 18.87 kgs

458 lbs / 207.75 kgs

2290 lbs / 1038.72 kgs

Warum bei FormX kaufen?

Wir lieben Material

Seit über dreißig Jahren suchen wir weltweit nach den hochwertigsten Materialien für Modellbau, Formenbau und Guss.

Inspirierend + Einzigartig

Von Silikonen und Harzen bis zu Jesmonite und Special-Effects-Materialien — ein sorgfältig kuratiertes Sortiment für Profis, Künstler und Macher.

Fachkundige Beratung

Unser Vertriebsteam ist bekannt für sein Wissen und Engagement und unterstützt Sie bei Formenbau, Guss, Bildhauerei und Prototyping.

Versand in ganz Europa

Wir versenden aus unseren Lagern in Amsterdam, Barcelona und Madrid an Kunden in ganz Europa, von Griechenland bis Norwegen.

Amsterdamer Original

FormX wurde in Amsterdam gegründet und wuchs von einer lokalen Kunstgießerei zu einem bedeutenden europäischen Lieferanten — mit festen Wurzeln in der Stadt.

In & Out™ II

Beschreibung

Anleitung

Spezifikationen